e2b calibration Named Authorized Service Center for Tronair GSE Products

CHARDON, OH–(August 17, 2016) – e2b calibration (www.calibration.aero), an ISO/IEC 17025 calibration and repair laboratory for test equipment announced that it is now a recognized North American Authorized Service Center for Tronair’s aircraft ground support equipment (GSE). e2b calibration technicians provide maintenance, testing and repair services for Tronair products.

Continue reading

e2b calibration Adds New Website to Better Assist Customers in Aviation and Aerospace Industry

(CHARDON, OH) March 22, 2016 – e2b calibration (www.e2bcal.com), an ISO/IEC 17025 accredited calibration and repair laboratory providing a full scope of NIST traceable calibration test and measurement services, has launched a new website,www.calibration.aero, to better assist aviation and aerospace customers. The new website makes industry-specific information more accessible to the majority of e2b calibration’s customers engaged in aviation and aerospace industry.

Continue reading

e2b calibration Expands Internal Quality Initiatives with 5S Implementation

(Chardon, OH) Feb 10, 2016e2b calibration has implemented new practices throughout its accredited calibration facility to enhance quality services and turnaround time for clients. These practices have reduced the time it takes to calibrate customer equipment and instruments and ensuring high quality test results and precision demanded in highly-regulated industries.
Continue reading

On-site Proof Load Testing Services for Hydraulic Aircraft Jacks Now Available from e2b calibration

cleveland calibration services(CHARDON, OHIO) September 8, 2015 –e2b calibration, an ISO/IEC 17205 accredited calibration and repair laboratory in Cleveland, Ohio, today announced the availability of on-site proof load testing for hydraulic aircraft jacks.

The company recently made an investment to develop a proprietary mobile proof load testing fixture, which allows e2b calibration to provide on-site load testing for single-stage and multi-stage tripod jacks with a capacity up to 75,000 pounds. e2b calibration also has the tools and capabilities to provide on-site load testing for axle jacks. Services are available immediately to customers throughout the United States.
Continue reading

Cleveland Calibration Lab Completes Annual ISO 17205 Quality Audit & Expands ISO Calibration Capabilities

Cleveland Calibration Chardon Ohio, March 06, 2015— Today, e2b calibration, an ISO/IEC 17025 accredited calibration and repair laboratory in Cleveland Ohio, announced the completion of its annual ISO quality audit by ANAB, a part of the ANSI-ASQ National Accreditation Board. The successful completion of the quality audit certifies that e2b calibration continues to maintain the proper procedures, documentation, and test equipment, to provide valid calibrations that meet ISO 17205 quality standards.
Continue reading

Provider of Cleveland Calibration Services Continues to Expand

Cleveland Calibration ServicesChardon, Ohio, September 30, 2014- e2b calibration, an ISO/IEC 17025 accredited calibration laboratory and provider of Cleveland calibration services, today announced that the company continues to grow, attract more customers, hire additional staff, and make significant investments to further expand its capabilities. Continue reading

Ohio Calibration Lab Extends Pharmaceutical and Medical Device Calibration and Repair Services

Chardon, Ohio, June 26, 2014- Today, e2b calibration, an ISO/IEC17025 accredited calibration and repair laboratory located in Northeast Ohio, announced the addition of two new technicians with a combined 40 years of experience in the pharmaceutical and medical device industry. The addition of these new technicians allows the lab to further extend their pharmaceutical and medical device calibration services, increase throughput, decrease turnaround times, and better serve customers in the pharmaceutical and medical device manufacturing industries. Continue reading

e2b Calibration Increases Pressure & Vacuum Calibration Capabilities

Chardon, Ohio, June 20, 2014- Today, e2b calibration, an ISO/IEC17025 accredited calibration and repair laboratory located in Northeast Ohio, announced the company has again expanded its capabilities for pressure and vacuum calibration through the addition of new capital equipment and technicians. Continue reading

e2b calibration Successfully Completes Annual Aduit for IS0 17205 Calibration

 ISO 17205 calibrationChardon, Ohio March 20, 2014- Today, e2b calibration announced the successful completion of their annual quality audit by ACLASS. This confirms the company meets ISO 17205 calibration regulations and continues to provide high quality calibration to customers through procedures, documentation, and test equipment that meet strict ISO 17205 quality standards. Continue reading

Ohio Calibration Lab Announces Fifth Consecutive Year of Revenue Growth and New Customers in the Avionics Industry

avionics calibrationChardon, Ohio February 05, 2014- Today, e2b calibration, an ISO/IEC 17025 accredited calibration and repair laboratory in Northeast Ohio, announced its fifth consecutive year of revenue growth, the addition of several significant customers in the aviation industry, and other important growth indicators as the company wraps up 2013 and looks forward to the new year ahead. Continue reading

e2b Calibration Further Enhances Fluke Calibration Services

fluke calibration servicesChardon, Ohio February 4, 2014- Today, e2b calibration, an accredited calibration and repair laboratory located in Northeast Ohio, announced the completion of lab renovations, the addition of two new calibration technicians, and the development and implementation of a state-of-the-art internal software system for enhanced Fluke calibration services. Continue reading

New Systems Allow for Streamlined Flow Meter, Vacuum, and Pressure Calibration

Chardon, Ohio, November 28, 2013- Today, e2b calibration, an ISO/IEC 17025 accredited calibration and repair laboratory located in Northeast Ohio, announced the development and implementation of several new internal software systems. The purpose of these new systems is to automate some of the calibration processes to increase throughput for the growing lab, further improve service quality, and provide faster turnarounds for customers seeking calibration of flow, vacuum, and pressure measurement instruments. Continue reading

e2b calibration Expands Scope to Include High Vacuum Calibration for Pharmaceutical, Chemical, and Medical Device Manufacturers

Chardon, OH, June 18, 2013 –Today, e2b calibration, an ISO/IEC 17025 accredited high vacuum calibrationcalibration and repair laboratory located in Northeast Ohio, announced the company’s expanded ACLASS accreditation scope to include high vacuum calibration allowing the company to better serve customers. The Company also reported record revenue and the addition of a new calibration technician. Continue reading

Cleveland Ohio Calibration Lab Expands Scope and Closes Record Month

Chardon, Ohio , April 11, 2013- Today, e2b calibration, a business unit of e2b teknologies announces its’ successful completion of the labs 2013 annual quality audit for A-Class ISO/IEC 17025 accreditation. The company continues to provide high quality calibration services and grow in 2013 with an expanded scope, new equipment, additions to the facility, and a record month in March.

Continue reading